Ricoh P C600 User Manual

3. Insert the SD card into the slot until it clicks.
EAG346
If you insert only one SD card, use the upper slot. If you insert two SD cards simultaneously, use
both slots. If you insert the optional VM card, use only the lower slot.
If you want to use two or more SD cards simultaneously, contact your service representative.
4. Tighten the two screws to secure the slot cover.
5. Plug in the power cord, and then turn on the printer.
6. Check that the SD card was installed correctly.
• You can confirm that the SD card was installed correctly by checking the control panel menu or
configuration page.
• VM card: Make sure [JavaTM/X] appears when the [Switch Functions] key is pressed.
• Camera direct print card: Printing the configuration page, if the camera direct print card is
installed properly, "PictBridge" will appear for "Printer Language" in "System Reference". For
details about printing the configuration page, see "Test Printing", Operating Instructions.
• XPS card: Printing the configuration page, if the XPS card is installed properly, "XPS" will
appear for "Printer Language" in "System Reference". For details about printing the
configuration page, see "Test Printing", Operating Instructions.
• If the card is not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after trying the installation a second time, contact your sales or service
representative.
• Do not touch the card while the printer is in use. It may come loose, even if pushed only slightly. The
slot cover must be reattached.
1. Getting Started
34

Ricoh P C600 Specifications

General

Type	Original
Printing colors	Black
Quantity per pack	1 pc(s)
Built-in drum unit	-
Brand compatibility	Ricoh
Black toner page yield	18000 pages
Print technology	Laser printing

Weight and Dimensions

Package type	Box
Package weight	379 g