Ricoh P C600 - Turning Printer Power On and Off

Turning On/Off the Power
This section explains how to turn on/off the printer.
Turning On the Power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Push the main power switch.
EAG033
The power indicator turns on.
Turning Off the Power
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Do not press and hold the main power switch when turning off the printer. Doing so shuts down the
printer forcefully and may damage the hard disk, causing a malfunction of the printer.
• Before unplugging the power cord plug, turn off the power switch and make sure the power switch
indicator turns off. Not doing so may result in damage to the hard disk or memory, leading to a
malfunction.
• Do not turn off the power while the printer is in operation.
Turning On/Off the Power
35