R21
Rec. Mode Menu
A
4 Press F.
The [Button Customization] screen reappears.
Repeat Steps 2 to 4.
5 Press F twice.
1 Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of “Button Customization” (p.R20).
2 Select T or S for [Cancel after 1 shot].
3 Select the file format when
O is pressed.
The left side is the [File Format] setting
and the right side is the changed file
format when O is pressed.
Caution
• The One Push File Format function cannot be used when [Memory
Card Options] is set to [Separate RAW/JPEG] in the A1 menu.
(p.R15)
Preview
Dial
Optical Preview
Activates the Optical Preview.
w p.67
Digital Preview Activates the Digital Preview.
Illumina-
tion
Button
LCD Panel
Illumination
Turns the LCD panel
illumination on when 8 is
pressed.
w p.23
Modeling Flash
Discharges the flash in
Modeling Flash mode when
a flash is connected and 8
is pressed.
w p.64
Test Flash
Discharges the flash in Test
Flash mode when a flash is
connected and 8 is pressed.
Setting Function Page
One Push File Format
T
The recording format returns to the [File Format] setting of
[Image Capture Settings] in the A1 menu after a picture is taken.
S
The setting is retained until any of the following operations
is performed:
• When O is pressed again
• When 3, F or G is pressed, or when the mode dial
or main switch is turned
To Next Page
Loading...
