R33
Set-up Menu
D
Each file name consists of a string
of 4 characters and a sequential
number from 0001 to 9999.
In [Sequential Numbering], you can
set whether to continue the sequential
numbering for the file name when
a new folder is created.
Select [Reset File Number] to reset the file number to its default
value.
Memo
• When the file number reaches 9999, a new folder is created and
the file number is reset.
Sets the photographer and copyright information embedded
in Exif data.
1 Select [Copyright Information] in D2 menu and
press D.
The [Copyright Information] screen appears.
2 Use CD to set [Embed
Copyright Data].
3 Select [Photographer] or [Copyright Holder],
and press D.
The text-entry screen appears.
4 Change the text.
Up to 32 single-byte alphanumeric
characters and symbols can be
entered.
File No.
D2
T
Continues the sequential numbering for the file name even if a new
folder is created.
S
Returns the file number of the first image saved to a folder to 0001
each time a new folder is created.
To Next Page
Loading...
