R40
Custom Setting menu
E
Sets the order for Exposure Bracketing shooting.
Shoots all frames with one press of the shutter release button
when using Exposure Bracketing.
Fine-tunes the white balance when the light source is specified.
Select [Auto White Balance], [Multi Auto White Balance], [Flash]
or [Unchanged] for the white balance when the flash
discharges.
Adjusts the tungsten light color tone when [White Balance] is set
to [Auto White Balance].
Sets the unit of the white balance color temperature to [Kelvin]
or [Mired].
The selected AF point lights red in the viewfinder.
Selects the action priority for when the focus mode is set to
x and the shutter release button is fully pressed.
8. Bracketing Order
E2
Setting Frames Order
0 - +
2 frames
3 frames
5 frames
0 → -1, 0 → +1
0 → -1 → +1
0 → -1 → +1 → -2 → +2
- 0 +
2 frames
3 frames
5 frames
-1 → 0, 0 → +1
-1 → 0 → +1
-2 → -1 → 0 → +1 → +2
+ 0 -
2 frames
3 frames
5 frames
0 → -1, +1 → 0
+1 → 0 → -1
+2 → +1 → 0 → -1 → -2
0 + -
2 frames
3 frames
5 frames
-1 → 0, +1 → 0
0 → +1 → -1
0 → +1 → -1 → +2 → -2
9. One-Push Bracketing
E2
10. WB Adjustable Range
E2
Fixed Color temperature of the light source is fixed.
Auto Adjustment Automatically performs fine-tuning.
11. WB When Using Flash
E2
12. AWB in Tungsten Light
E2
Subtle Correction Keeps the tungsten light color tone.
Strong Correction Applies a stronger correction of the tungsten light.
13. Color Temperature Steps
E2
14. Superimpose AF Area
E2
15. AF.S Setting
E3
Focus-priority The shutter is not released until the subject is in focus.
Release-priority The shutter is released even if the subject is not in focus.
e_kb547_ENG.book Page 40 Thursday, May 15, 2014 9:35 AM
To Next Page
Loading...
