Ricoh Pentax 645Z - Preview; Setting the Preview Method

65
Shooting Functions
3
The following flash modes are available. The flash modes
that can be set vary depending on the exposure mode.
1 Press B in standby mode.
The screen to set a flash mode
appears.
2 Select a flash mode.
3 To compensate the flash
output, press B and then use
R to adjust the value.
The compensation value varies depending on the setting of [1. EV
Steps] (w p.R39) in the E1 menu.
Press M to reset the value to 0.0.
4 Press E.
The camera returns to standby mode.
Setting the Flash Mode
X
Flash Mode Available Exposure Modes
C
Flash On
G, H, I, J, K, L, M, N
D
Flash On+Red-eye
Reduction
E
Slow-speed Sync
G, H, J
F
Slow-speed Sync+Red-eye
Flash On
Flash On
Cancel
Cancel
OK
OK
0.0
0.0
Flash On
Flash On
Cancel
Cancel
OK
OK
+0.7
+0.7
EV Steps Compensation Value
1/3 EV
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7,
+1.0
1/2 EV
-2.0, -1.5, -1.0, -0.5, 0.0, +0.5, +1.0
e_kb547_ENG.book Page 65 Thursday, May 15, 2014 9:35 AM