48
Shooting Functions
3
The following are the available exposure modes. (x: Available ×: Not available)
Memo
• Set the program line in [Program Line] of the A2 menu. (w p.R18)
• The sync speed of N can be changed in [25. Flash Sync Speed] of the E4 menu. (w p.R42)
• Save the settings to O, P, or Q in [Save USER Mode] of the A4 menu. (w p.R22)
Changing the Exposure Mode
Exposure Mode Function
EV
Compensation
Change Shutter
Speed
Change
Aperture Value
Change
Sensitivity
G
Program Automatic
Exposure
Automatically sets the shutter speed and aperture value
according to the program line.
You can use Q or R to switch between shutter priority and
aperture priority.
xxxx
H
Sensitivity Priority
Automatic Exposure
You can set the desired sensitivity.
x
××
Other than
AUTO
I
Shutter Priority
Automatic Exposure
You can set the desired shutter speed.
xx
×
x
J
Aperture Priority
Automatic Exposure
You can set the desired aperture value.
x
×
xx
K
Shutter & Aperture
Priority Automatic
Exposure
Automatically sets the sensitivity according to the set shutter
speed and aperture value.
xxx
AUTO only
L
Manual Exposure
You can set exposure parameters.
xxx
Other than
AUTO
M
Bulb Exposure
Bulb shooting × ×
x
Other than
AUTO
N
Flash X-sync Speed
The shutter speed is locked at 1/125 seconds. Use this when
using a flash that does not automatically set the sync speed.
x
×
x
Other than
AUTO
O/P/Q
User settings
Lets you capture images with the previously-saved exposure
mode and settings.
––––
e_kb547_ENG.book Page 48 Thursday, May 15, 2014 9:35 AM
To Next Page
Loading...
