49
Shooting Functions
3
1 Turn the mode dial while
pressing the mode dial lock
button.
2 Use Q or R to change
settings.
Q and/or R appear on the status
screen next to the setting that is being
changed.
The value that can be changed
is underlined in the viewfinder.
Q and/or R appear on the LCD
panel for the value that can
be changed.
During Live View, D appears
for the value that can be changed.
Memo
• The settings for exposure can be specified in increments of 1/3 EV
steps. In [1. EV Steps] of the E1 menu, you can change
the adjustment steps to 1/2 EV steps. (w p.R39)
• A proper exposure may not be obtained with the selected shutter
speed and aperture value when the sensitivity is set to a certain
sensitivity value.
•In L or N mode, the difference from the proper exposure is
displayed on the EV bar scale while the exposure is adjusted.
•In M mode, the drive mode cannot be set to Continuous Shooting,
Multi-exposure+Continuous, Interval Shooting, Interval
Composite, or Exposure Bracketing.
• For each exposure mode, you can set the camera operation
for when Q or R is turned or M is pressed. Set in [E-Dial
Programming] of the A4 menu. (w p.R20)
To Next Page
Loading...
