36
Getting Started
2
Memo
• Pressing F while setting the date and time cancels the settings
and switches the camera to standby mode. The [Initial Setting]
screen or the [Date Adjustment] screen will appear again the next
time the power is turned on.
• To change the date and time, use the D1 menu. (w p.R28)
A memory card must be formatted with this camera before use.
1 Press F.
The A1 menu appears.
2 Turn Q or R to display D4 menu.
3 Use AB to select [Format]
and press D.
The [Format] screen appears.
4 Use AB to select the memory
card slot to format and press
D.
Formatting a Memory Card
D4
To Next Page
Loading...
