R22
Rec. Mode Menu
A
Most of the functions set on this camera are saved even if the
camera is turned off. For the following function settings, you can
select whether to save the settings (T) or to return the settings
to their default values (S) when the camera is turned off.
Caution
• [Memory] cannot be selected when the mode dial is set to O, P,
or Q.
Memo
• If [Playback Info Display] is set to off, the [Standard Information
Display] always appears first when the camera is turned on.
(w p.19)
• When [Reset] of the D3 menu is performed, all Memory settings
return to the default values. (p.R35)
Camera settings can be saved to O, P, and Q of the mode
dial and used repeatedly.
The following settings can be saved.
1 Set all of the settings to save on the camera.
2 Select [Save USER Mode] in A 4 menu and press D.
The [Save USER Mode] screen appears.
3 Select [Save Settings] and
press D.
The [Save Settings] screen appears.
4 Select [USER1], [USER2] or [USER3], and press D.
5 Select [Save] and press E.
The [Save Settings] screen reappears.
Memory
A4
• Flash Mode
• Drive Mode
• White Balance
• Custom Image
• Sensitivity
• EV Compensation
• Flash Exposure
Compensation
• Exposure Bracketing
• HDR Capture
• Playback Info Display
• Enable/Disable Controls
Save USER Mode
A4
• Exposure Mode (except for
C)
• Sensitivity
• EV Compensation
• Metering mode
• AF point
•Flash Mode
•Drive Mode
• White Balance
• Custom Image
• A1-4 menu settings
(with exceptions)
• E1-5 menu settings
(with exceptions)
Save Settings
To Next Page
Loading...
