34
Getting Started
2
Power
1 Turn the main switch to [ON].
The first time the camera is turned on
after purchase, the [Language/W]
screen appears.
Memo
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform
any operations within a set period of time (Auto Power Off).
To reactivate the camera after it turns off automatically, turn
it on again, or press the shutter release button or 3.
• By default, the camera is set to power off automatically after
1 minute of inactivity. You can change the setting in [Auto
Power Off] of the D3 menu. (w p.R34)
Initial Settings
The first time the camera is turned on after purchase,
the [Language/W] screen appears on the monitor.
Follow the procedure below to set the display language
and the current date and time.
1 Use ABCD to select the desired language
and press E.
The [Initial Setting] screen appears
in the selected language.
2 Press B.
The cursor moves to F (Hometown).
If the hometown is set as you desire, proceed to Step 7 on p.35.
3 Press D.
The [F Hometown] screen appears.
4 Use CD to select a city.
Use R to change the region.
5 Press B.
The cursor moves to [DST] (daylight saving time).
Language Setting
To Next Page
Loading...
