69
Shooting Functions
3
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The camera returns to standby mode.
Memo
• When [Reversal Film] is selected and [White Balance] is set to
[Auto White Balance], images are captured with an effect similar
to using a daylight film.
The outcome of Cross Processing varies each time a picture
is taken. If you take a cross processed image that you like,
you can save the Cross Processing settings used in that image
so that you can repeatedly use the same settings.
1 Press B in single image display of playback mode.
The playback mode palette appears.
2 Select a (Save Cross Processing) and press E.
The camera searches for cross processed images starting from
the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use Q to select a cross
processed image.
4 Select the “Favorite” number 1, 2 or 3 to save
the settings and press E.
The settings of the selected image are saved as your “Favorite”
settings.
Memo
• The saved Cross Processing settings can be loaded by selecting
[Cross Processing] in Step 2 of “Custom Image” (p.68), and
selecting one of the Favorite settings 1 to 3 for the parameter.
AB
Selects a parameter.
CD
Adjusts the value.
Q
Switches between [Contrast], [Contrast Highlight
Adjustment] and [Contrast Shadow Adjustment].
R
Switches between [Sharpness], [Fine Sharpness]
and [Extra Sharpness]. (Not available in C mode.)
M
Resets the adjustment value to the default setting.
To Next Page
Loading...
