74
Playback and Processing Functions
4
Changing the Playback
Method
You can display 6, 12, 20, 35 or 80 thumbnail images
at the same time. (Default setting: 12 Thumbnail Display)
1 Turn R to the left in single
image display.
The multi-image display screen
appears.
Available operations
2 Press E.
The selected image appears in single image display.
Memo
• Icons such as U are not displayed on the thumbnail images when
[80 Thumbnail Display] is selected.
1 Press L in Step 1 of “Multi-image Display”.
2 Select the images to delete.
Available operations
In the upper left area of the monitor, the number of selected images
is displayed.
3 Press L.
The delete confirmation screen appears.
4 Select [Delete] and press E.
Memo
• You can select up to 500 images at a time.
• Protected images cannot be selected.
• You can delete the images selected individually along with
the images selected by specifying the range to delete.
• Use the same steps to select multiple images for the following
functions.
• Image Copy (p.77)
• RAW Development (p.82)
• Protect (p.83)
• Eye-Fi Image Transfer (w p.R34)
Multi-image Display
ABCD
Moves the selection frame.
Q
Shows the next/previous page.
d
Switches between the SD1 card and SD2 card.
G
Shows the display style
selection screen.
L
Deletes the selected images.
100
_
0505
Select & Delete
ABCD
Moves the selection frame.
E
Confirms/cancels the selection of the image
to delete.
J
Selects the range of images to delete.
R
Shows the selected image in single image display.
Use Q to select a different image.
To Next Page
Loading...
