42
Getting Started
2
This section explains how to use the menus: [A Rec. Mode],
[C Movie], [B Playback], [D Set-up] and [E Custom Setting].
The following explains how to set [Slow Shutter Speed NR]
in the A2 menu as an example.
1 Press F in standby mode.
The A1 menu appears on the monitor.
2 Press D or turn R
to the right.
Each time D is pressed, the menu will
change in the following sequence: A2,
A3, A4, C1 ...A1.
When Q is turned to the right, the
category will change in the following sequence: A1, C1, B1,
D1, E1.
3 Use AB to select an item
and press D.
Available settings are displayed.
Any detailed settings are displayed
in the submenu.
4 Use AB to select an item
and press E.
Next, set other items.
Press F to exit the menu and return
to the screen that was displayed before
selecting a menu item.
Caution
• Your settings may not be saved if the camera is turned off
improperly (such as by removing the battery while the camera
is on).
Memo
• Press F to display the first tab of the proper menu for the
camera conditions at that time. To display the menu tab last
selected first, set in [23. Save Menu Location] of the E4 menu.
(w p.R41)
• Settings are returned to their default values with [Reset]
of the D3 menu. (w p.R35) To reset all the settings
of the Custom Setting menu (E1-5) to the defaults, use
[Reset Custom Functions] of the E5 menu. (w p.R43)
• Refer to “Menu Reference” for details on each menu.
• A Rec. Mode Menu w p.R15
• C Movie Menu w p.R24
• B Playback Menu w p.R26
• D Set-up Menu w p.R28
• E Custom Setting Menu w p.R39
Using the Menus
F
To Next Page
Loading...
