R20
Rec. Mode Menu
A
For each exposure mode, you can select the parameters
for when Q and R are turned and M is pressed.
1 Select [E-Dial Programming] in A4 menu
and press D.
The [E-Dial Programming] screen appears.
2 Select an exposure mode and press D.
The screen for the selected exposure mode appears.
3 Select the desired setting
for each exposure mode
and press E.
4 Press F.
The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 4.
5 Press F twice.
Memo
• If you select [Rotation Direction] in Step 2, you can reverse
the effect obtained by turning Q or R.
You can set the functions for when O, I or 8 is pressed,
or when the main switch is turned to U.
1 Select [Button Customization] in A4 menu and
press D.
The [Button Customization] screen appears.
2 Select the item to set and
press D.
The screen to set the function for
the selected item is displayed.
3 Select a function and press E.
The following functions can be assigned to each button.
E-Dial Programming
A4
I
Change Shutter Speed
J
Change Aperture Value
ISO Change Sensitivity
e
EV Compensation
XG Return to G Mode
GSHIFT Program Shift
GLINE Program Line
-- Not available
OK
Button Customization
A4
Setting Function Page
RAW/Fx
Button
One Push File
Format
Temporarily changes the file
format.
p.R21
Optical Preview
Activates the Optical Preview.
w p.67
Digital Preview Activates the Digital Preview.
AF
Button
Enable AF1
Autofocus is performed when
I is pressed.
w p.44
Enable AF2
Autofocus is performed when
I is pressed and not when
the shutter release button
is pressed halfway.
Cancel AF
While I is pressed,
autofocus is not performed
even when the shutter
release button is pressed
halfway.
To Next Page
Loading...
