80
Playback and Processing Functions
4
1 Display the image to edit in single image display.
2 Select T in the playback mode palette.
The screen to select a filter appears.
3 Select a filter.
Use Q to select a different image.
Proceed to Step 6 if you do not need
to change the parameters.
4 Press G.
The parameter setting screen appears.
5 Set the parameters.
Available operations
6 Press E.
The save confirmation screen appears.
7 Select [Apply additional filter(s)], [Save to SD1]
or [Save to SD2], and press E.
Select [Apply additional filter(s)] when you want to apply additional
filters to the same image. The screen of Step 3 reappears.
Caution
• Only JPEG and RAW images captured with this camera can be
edited with the digital filters. TIFF images cannot be edited.
Memo
• You can apply up to 20 filters to the same image.
Retrieves the filter effects of the selected image and applies
the same filter effects to other images.
1 Display a filter-processed image in single image
display.
2 Select T in the playback mode palette.
3 Select [Recreating filter effects]
and press E.
The filter effects used for the selected
image appear.
4 To check the parameter
details, press G.
Press G again to return
to the previous screen.
5 Press E.
The image selection screen appears.
AB
Selects a parameter.
CD
Adjusts the value.
To Next Page
Loading...
