HOW TO USE IMAGE MAKE-UP MODE
HOW TO USE IMAGE MAKE-UP MODE
Saving And Deleting Modes (One Command
Press the Make-up key.
If you want to leave Make-up mode
at any time, press the Make-up
key again.
Using the Number keys, select
Image Make-up
mode for the
designated area. (~ See page
5.)
Save
area ... Fnl or Fnl 1
Delete area ... Fn3 or Fnl 3
Press the Enter key.
If a Fn No. (command number)
was entered previously and is still
in memory, press the Clear key.
The commands entered previously
are stored in memory until the
main switch is turned off or the
Clear Modes key is pressed.
15
To Next Page
Loading...
