HOW TO USE IMAGE MAKE-UP MODE
16
Press the Enter key again.
Using the Number keys, select
Image Make-up mode for the
outside area (~ See page 6).
Save area ... Fnl
Delete area ... Fn3
Press the Enter key.
To check the modes that you have
entered, press the Make-up key
twice and then keep pressing the
Enter key to display the modes on
the guidance display one at a time.
Set the command sheet face
down on the exposure glass
and press the Master Making
key.
The beeper
sounds after the
command sheet is scanned. Set
the original face down on the
exposure glass and press the
Master Making key.
To Next Page
Loading...
