Ricoh Pro 8100S - 3. Copy; Basic Procedure

Broken Thin Lines
Thin lines (1 dot lines in 1200 dpi images) break.
CEZ569
Cause:
Oblique (approximately 45°) thin lines or thin lines printed in faint colors are likely to contain breaks.
Solution:
1. In the [Machine: Image Quality] group on the [Adjustment Settings for Skilled Operators]
menu, select [Adjust Image Density] and execute [Image Density Adjustment: Manual
Execute].
2. Print the image. Is the problem resolved?
Yes Finished!
No Go to the next step.
3. Increase the value by 1 in [Adjust Line Width].
4. Select [Adjust Image Density] and execute [Image Density Adjustment: Manual Execute].
5. Print the image. Is the problem resolved?
Yes Finished!
No Repeat Steps 3 to 5. If the problem persists even though you have increased the value to
5, contact your service representative.
Density Problems
49