Ricoh Pro 8100S - Image Scaling Error on the Side 1 of Paper

<If custom paper is not used>
1. In the [Machine: Image Position] group on the [Adjustment Settings for Skilled Operators]
menu, adjust the image position.
• To adjust the position horizontally, change the value in [Adjust Image Position With Feed
Direction].
• To adjust the position vertically, change the value in [Adjust Image Position Across Feed
Direction].
If the problem persists even though you have adjusted the setting to its maximum and minimum values,
contact your service representative.
• For details about specifying settings in the [Adjustment Settings for Skilled Operators] menu, see the
Adjustment Item Menu Guide.
Image Scaling Error on the Side 1 of Paper
Paper feed direction
Original
Output
CEZ524
Cause:
An image scaling error may occur because of expansion or contraction of the paper.
Solution:
Adjust the image scaling.
1. In [Advanced Settings] for the custom paper in use, adjust the image scaling.
• To adjust the horizontal scaling, change the value in [Adj Magnification of Side1 Across
Feed].
• To adjust the vertical scaling, change the value in [Adj Magnification of Side1 With Feed].
Press [+] to increase the scaling and [-] to decrease it.
Paper Feed Problems Affecting Image Quality
75