Ricoh Pro 8100S - Image Scaling Error on the Side 2 of Paper

2. Print the image. Is the problem resolved?
Yes Finished!
No If the problem persists even though you have adjusted the setting to its maximum and
minimum values, contact your service representative.
Image Scaling Error on the Side 2 of Paper
Paper feed direction
Original
Output
Side 1 Side 2
CEZ525
Cause:
An image scaling error on the side 2 of the paper may occur because the paper expands or contracts
after the image on the side 1 of the paper has been fused.
Solution:
Adjust the scaling for the side 2 of the paper and minimize the difference in print size between the side 1
and the side 2.
1. In [Advanced Settings] for the custom paper in use, adjust the image scaling.
• To adjust the horizontal scaling, change the value in [Adj Magnification of Side2 Across
Feed].
• To adjust the vertical scaling, change the value in [Adj Magnification of Side2 With Feed].
Press [+] to increase and [-] to decrease the scaling.
2. Print the image. Is the problem resolved?
Yes Finished!
No Contact your service representative.
4. Troubleshooting Paper Delivery Problems
76