Cause:
Glossy lines perpendicular to the paper feed direction may appear 251 mm (10 inches) from the
boundary of the margin and the solid image (in the direction opposite to the paper feed direction).
Solution:
1. Print the image on twenty sheets. Do glossy lines appear on the tenth sheet and later
sheets?
Yes Go to the next step.
No You cannot resolve the problem with this procedure. Contact your service representative.
2. In [Advanced Settings] for the custom paper in use, select [Fusing Heat Roller
Temperature Adj] and decrease the value by 5 °C.
Gloss Problems
55
To Next Page
Loading...
