Default: [30]
• Measurement Time
Specify the interval between repeated authentication attempts that result in authentication
failures. When the measurement time elapses, the records of authentication attempts are
cleared.
Use the number keys to specify the value between "1" and "10", and then press [ ].
Default: [5]
• Depending on the values specified for the settings for [Max. Allowed No. of Access] and
[Measurement Time], you may receive violation detection e-mails frequently.
• If you receive violation detection e-mail s frequently, check the content and review the setting
values.
Security Setting for Access Violation
The machine administrator.
When logging in to the machine via a network application, a user may be locked out by mistake
because the number of authentication attempts by the user does not match the number of the
attempts specified on the machine.
For example, access may be denied when a print job for multiple sets of pages is sent from an
application.
If you select [On] under "Security Setting for Access Violation", you can prevent such authentication
errors.
• On
• Denial Durtn. for Accs. Viol.
Specify how many user accesses are allowed.
Use the number keys to specify the value between "0" and "60", and then press [
].
Default: [15]
• Managed User Host Limit
Specify how many user accounts can be managed under "Security Setting for Access
Violation".
Use the number keys to specify the value between "50" and "200", and then press [ ].
Default: [200]
• Password Entry Host Limit
Specify how many passwords can be managed under "Security Setting for Access
Violation".
Use the number keys to specify the value between "50" and "200", and then press [ ].
Specifying the Extended Security Functions
165
To Next Page
Loading...
