Defect Detection Level Settings for Edges
Adjust the detection sensitivity in the edge regions of images and text as well as in their peripheries
in the range Level 1 to Level 3. Erroneous detection may occur because of the minute dimensional
deviation of the image in the edge regions.
If erroneous detection in the edge regions occurs frequently, decrease the detection level. To
increase the detection sensitivity in the edge regions, increase the detection level. Note, however,
that doing so will increase the risk of erroneous detection.
1. Edges
2. Edge regions
Delete
Use to delete a custom preset. Factory-set threshold presets cannot be changed. Select the custom preset
to delete from the list, and then click its icon.
1. Operating and Settings
26
To Next Page
Loading...
