Import
Use to import the threshold preset from the local network.
Export
Use to export the threshold preset to the local network.
Select the threshold preset with the settings that you want to export, and then click the icon.
Use this as well for saving previous settings when editing custom presets.
Add Inspection Patterns
Click [ ] to display the setting and specify whether or not to add inspection patterns to the printed
copies. Margins are necessary on both sides if you do this.
It is recommended to add inspection patterns for accurate inspection.
[On] : Add inspection patterns to all paper.
[Off] : No inspection pattern is added to all paper.
[Auto] : Follow the instructions for [Image Position Feedback Correction]. For details, ask the machine
administrator.
The default setting is [Auto]. If you select [Off], or select [Auto] and set [Image Position Feedback
Correction] to [Correction Off], the inspection may not be performed properly.
• The margins required for adding inspection patterns are given below. The required margins vary
depending on whether or not there are detection marks for [Image Position Feedback Correction].
Without detection marks for [Image Position Feedback Correction]
To add inspection patterns, margins of 1.0 mm (0.04 inches) or more are required.
If the margins are set to the default, the required margins are 5.0 mm (0.2inches) at the top and
bottom and 3.0 mm (0.12 inches) on each side.
Threshold Setting
27
To Next Page
Loading...
