Function
Turn on or off the return fan shutter in 2-Tray LCIT.
If set to On, the shutter opens and closes per sheet.
If set to Off, the shutter remains open.
When to use
As the default, this is set to On. Normally, this is not set to Off, because doing so reduces the power
to separate paper.
Vacuum Fan Shutter
1302 [Main/2-Tray LCIT: Fan/Shutter] [Vacuum Fan Shutter: Main]
1302 [Main/2-Tray LCIT: Fan/Shutter] [Vacuum Fan Shutter: 2-Tray LCIT]
Function
As the default, this is set to On. Normally, this is set to On, because setting it to Off may cause
streaks on some paper.
When to use
To reduce paper feed belt streaks on printed copies, set the shutter to ON.
Paper Floating Wait Time
1303 [Main/2-Tray LCIT: Other Setting] [Paper Floating Wait Time]
Function
Adjusts the timing to monitor bulging of the paper when it is being fed.
When to use
If paper misfeeds occur immediately after the paper is fed, the problem may be solved by
decreasing the value of this setting.
If paper double-feeds occur immediately after the paper is fed, the problem may be solved by
increasing the value of this setting.
Extend Fan Operating Time
1303 [2-Tray LCIT: Other Setting] [Extend Fan Operating Time]
Function
Specify the length of time for the fan to blow air on the paper.
When to use
Set this to [On] if double-feeding or misfeeds occur frequently.
Paper Feed/Delivery
47
To Next Page
Loading...
