Ricoh Russian-C2a - Page 172

10 August, 2001 SERVICE PROGRAM MODE
4-9
Service
Tables
1
Mode Number/Name Function/[Setting]
2 Small Size Adjusts the upper paper lift motor reverse time for
paper of the same size as or smaller than the small
size threshold set with SP1-908-8.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from
the 1st paper tray.
See “Paper Lift Mechanism” for details on SP1-908.
[0 ~ 2000 / 600 / 1 ms/step]
3 Middle Size
Adjusts the upper paper lift motor reverse time for
paper sizes larger than the small size threshold set
with SP1-908-8, up to and including the middle size
threshold set with SP1-908-9. If a middle size
threshold is not stored with SP1-908-9, this SP is not
used.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from
the 1st paper tray.
See “Paper Lift Mechanism” for details on SP1-908.
[0 ~ 2000 / 200 / 1 ms/step]
1st Bottom Plate Pressure Re-adjustment
4 Small Size Adjusts the upper paper lift motor forward rotation time
for paper of the same size as or smaller than the small
size threshold set with SP1-908-8. The motor rotates
forward when the remaining paper amount is lower
than the value of SP1-908-6.
Use this SP when a paper feed problem occurs when
paper in the 1st paper tray is running low.
See “Paper Lift Mechanism” for details on SP1-908.
[0 ~ 2000 / 400 / 1 ms/step]
5 Middle Size Adjusts the upper paper lift motor forward rotation time
for paper sizes larger than the small size threshold set
with SP1-908-8, up to and including the middle size
threshold set with SP1-908-9.
The motor rotates forward when the amount of
remaining paper is lower than the value of SP1-908-7.
If a middle size threshold is not stored with SP1-908-9,
this SP is not used.
Use this SP when a paper feed problem occurs when
paper in the 1st paper tray is running low.
See “Paper Lift Mechanism” for details on SP1-908.
[0 ~ 2000 / 300 / 1 ms/step]
1st Paper Amount
6 Small Size Selects the remaining paper amount limit for use with
SP1-908-4.
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See “Paper Lift Mechanism” for details on SP1-908.
[0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%]
908*
7 Middle Size Selects the remaining paper amount limit for use with
SP1-908-5.
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See “Paper Lift Mechanism” for details on SP1-908.
[0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%]