4. Select the desired message.
You can change the color, position, size, and density of the stamp.
5. Press [All Pages] or [1st Page Only] to select the print page.
6. After making all settings, press [OK].
7. Press [OK].
• When the Full Color is selected, the full color counter will advance by “1”.
• The default stamp color is black.
• You can change the settings for Preset Stamp under Stamp in User Tools. Depending on the setting,
density may change. For details about Stamp, see “Copier/Document Server Features”, General
Settings Guide.
• p.30 "Original Orientation"
Changing the stamp color
Changes the stamp color.
1. Press [Stamp Color] under Stamp Color.
2. Select the stamp color, and then press [OK].
Changing the stamp position, size and density
Changes the stamp position, size and density.
1. Press [Change] under Position / Size / Density.
Stamps
143
To Next Page
Loading...
