7. Select the designation sheet tray that contains the paper for the designation sheets, and then
press the [ ] key.
8. To specify another page location, repeat step 4 to 7.
Up to 100 locations can be specified.
9. Select the main sheet tray that contains the sheet to copy the originals.
10. After making all settings, press [OK] twice.
• When this function is combined with Duplex, the first page of the designated pages is copied on the
front side of a designation sheet.
• The designation sheets should be the same size and orientation as the main sheet.
• To change the value you entered, press the key you want to change, and then enter a new value.
Insert Sheet
You can insert a blank designation sheet before or after a specified page.
• Before using this function, select the tray for slip sheets under Designation Sheet 1 Tray or Designation
Sheet 2 Tray in User Tools. For details, see “System Settings”, General Settings Guide.
1. Press [Cover/Slip Sheet].
Advanced Copier Functions
199
To Next Page
Loading...
