Supplementary Information
Describes the detailed specifications of the respective functions.
Batch mode
• You cannot switch between 1-sided and 2-sided originals during copying.
Mixed Sizes mode
• Since small originals may not be correctly aligned with the original guide, the copy image may
be slanted.
• Copying speed and scanning speed will be reduced.
• The weight range for originals in the Mixed Sizes mode is 52 - 81.4 g/m
2
(13.8 - 22.0 lb).
• When using this function with 1 Sided 2 Sided mode, always ensure that the originals of each
size are in even numbers. If you have an odd number of originals, insert blank sheets to adjust
the total.
Copy Face Up
• Copies are delivered face down (in the same order as the original) if Thin Paper, Plain Paper 1,
Plain Paper 2, Middle Thick, or Thick Paper 1 is specified.
• Copies are delivered face up (in reverse order of the original) if Thick Paper 2 or Thick Paper 3
is specified.
• Tab stock is delivered face down regardless of its paper weight.
Bypass Tray Copy
• The following paper sizes can be selected as the standard sizes:
A3 , B4 JIS , A4 , B5 JIS , A5 , B6 JIS , A6 , 100 × 148 mm
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
, 8 × 10
1
/
2
, 8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 11 × 15 , 11 × 14 ,
10 × 15 , 10 × 14 , 12 × 18
Preset Reduce/Enlarge
• You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ratios).
• The following shows the relation between the original and paper sizes at respective scaling
factors.
7. Appendix
248