Ricoh Savin C7570 - Order of Copy Output; Exiting Connect Copy

Order of Copy Output
Explains the machine behavior when Staple and Stack is specified with Connect Copy.
When copying with the Staple function
(Example) Copying 6 sets of a three-page original
BAT128S
1. Main machine (face-down)
2. Sub-machine (face-down)
When using the Staple function, the processing of one copy set cannot be divided between the two
machines.
When copying with the Stack function
(Example) Making 2 copies of each page of a six-page original
BAT129S
1. Main machine (face-down)
2. Sub-machine (face-up)
Stack copies made by the sub-machine on that of the main machine.
Exiting Connect Copy
This section explains how to cancel Connect Copy mode and return to standard copying mode.
5. Connect Copy
210
5