3. Select a book type separately for the original ([1 Sided] or [2 Sided]) and copy ([Booklet]
or [Magazine]), or select a book type from [Book 2 Sided] and [Front&Back 2 Sided].
If you specified [2 Sided] for the original, [Book 2 sided], or [Front&Back 2 sided], you can
specify the orientation of originals or copies.
4. Select the paper size.
5. Press [OK].
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• The machine sets the reproduction ratio automatically to meet the paper size.
• The default setting for the orientation of Booklet and Magazine is [Open to Left]. You can change the
default under Orientation: Booklet, Magazine in User Tools. For details, see “Copier/Document
Server Features”, General Settings Guide.
• p.71 "Originals and copy orientation"
Creep Adjustment
When Magazine is selected, you can specify the creep value.
When folding stacked paper, the thickness of the paper causes creep (progressive image loss) between
the most inner and most outer pages. The machine compensates for creep by progressively shifting the
copy image.
For example, when folding 15 sheets, the creep value will be 2 mm (0.1 inch), meaning there will be a 2
mm (0.1 inch) gap in the center of the image printed on the outermost sheet.
Advanced Copier Functions
189
To Next Page
Loading...
