• p.46 "Copying onto Tab Stock"
Loading Envelopes in the Wide LCT
Loading envelopes in the Wide LCT.
• When setting envelopes, always use the postcard side fence.
To load envelopes in the Wide LCT, place them with the side you want to copy face-up. Be sure to unfold
the flaps and position them opposite to the paper feed direction.
Before you can use this function, you must specify the size of your envelope under Tray Paper Size: LCT in
User Tools. For details, see “System Settings”, General Settings Guide.
1. Select the Wide LCT.
2. Place the originals, and then press the [Start] key.
• For the procedure to load envelopes in the Wide LCT, see “Changing the Paper Size in the Wide
Large Capacity Tray”, Troubleshooting.
• For details about supported envelope types, see “Envelopes”, About This Machine.
2. Basic Copying
62
To Next Page
Loading...
