• p.185 "Booklet/Magazine"
• p.248 "Supplementary Information"
Punch
You can make punch holes in copies.
• You cannot use Z-fold with this function.
• You cannot use the bypass tray with this function.
2 holes
3 holes
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the punch hole positions
is as follows:
Finishing
89
To Next Page
Loading...
