Ricoh Savin C7570 - Copying Onto Tab Stock

• Preset copy jobs are registered under job numbers in the Reserv. Screen.
• You can confirm and delete preset jobs. For details about the procedures, see “Managing Jobs”.
• p.97 "Managing Jobs"
Copying onto Tab Stock
You can copy onto tab stock.
BAS025S
• Before using this function, set the tray for tab stock and set the position of the index tab under Paper
Type in User Tools. For details about Paper Type, see “System Settings”, General Settings Guide.
BAS026S
1. Original width
2. Index width
• Specify the size of tab stock under Tray Paper Size in User Tools. The sizes that can be used are A4,
8
1
/
2
× 11, and 8
1
/
2
× 14. For details about Tray Paper Size, see “System Settings”, General Settings
Guide.
• Tab stock can be loaded in Trays 2 and 3 or Wide Large Capacity Tray (Wide LCT). Set tab stock
with the side to be copied facing down.
• When setting tab stock, always use the tab sheet holder.
2. Basic Copying
46
2