To specify the area you want to erase, you have to define the value of X1, Y1, X2, and Y2 on the original.
Measure the area you want to specify before entering the area settings.
X1, X2: 0 - 432 mm (0 - 17 inches)
Y1, Y2: 0 - 432 mm (0 - 17 inches)
1. Press [Edit / Color].
2. Press [Erase].
3. Select one of the areas from [Erase Inside 1] to [Erase Inside 5].
4. Advanced Copying
172
To Next Page
Loading...
