1. Press [Dup./Combine/Series].
2. Press [Mix 1&2 Sid.].
3. Select [1 Sided] or [2 Sided] for the original.
If you select [2 Sided], you can select the orientation.
4. Select [1 Sided] or [2 Sided] for the copy.
5. Place the originals, and then press the [Start] key.
6. If you specify [2 Sided] for either the originals or copies, press [Change Setting] if the number
of originals that you want to scan is odd, or if you want to change the settings for the next
originals.
Place the next originals, and then repeat steps 3 to 5.
Advanced Copier Functions
191
To Next Page
Loading...
