Auto Reset when using Connect Copy
The machine exits Connect Copy mode automatically and returns to the initial condition after a certain
period of time has lapsed following job completion.
This is called “Auto Reset”.
• If the Auto Reset time of the sub-machine lapses when it is processing an Interrupt Copy job, the sub-
machine will return to its initial condition and the Interrupt Copy job will be canceled. To change the
settings, see “System Settings”, General Settings Guide.
Auto Off when using Connect Copy
The machine automatically turns off after a certain period of time has lapsed following job completion.
This is called “Auto Off”. In Connect Copy mode, the sub-machine will not turn off automatically.
What is Connect Copy?
205
To Next Page
Loading...
