Item Description
Back Margin: Top /
Bottom
Specify top and bottom margins on the back side of copies in Margin
Adjustment mode.
1 Sided 2 Sided Auto
Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side.
1 Sided 2 Sided Auto
Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on
the back side.
Creep Setting for
Magazine
Specify the creep binding margin width.
Erase Border Width Specify the width of erased border margins with this function.
Erase Original Shadow in
Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 inch
boundary margin around all four edges of each original.
Erase Center Width Specify the width of the erased center margins with this function.
Front Cover Copy in
Combine
You can make a combined copy on the front cover sheet when you
select Front Cover mode.
Copy Order in Combine You can set the copy order in Combine mode to Left to Right or Top to
Bottom.
Orientation: Booklet,
Magazine
Select the opening orientation of copies made using Booklet or
Magazine mode.
Copy on Designating
Page in Combine
Specify whether to make a combined copy on the inserted slip sheets
in Desig./Chapter mode.
Image Repeat Separation
Line
You can select a separation line and color using the Image Repeat
function from: None, Solid, Broken A, Broken B, or Crop Marks.
Double Copies
Separation Line
You can select a separation line and color using the Double Copies
function from: None, Solid, Broken A, Broken B, or Crop Marks.
Separation Line in
Combine
You can select a separation line and color using the Combine function
from: None, Solid, Broken A, Broken B, or Crop Marks.
Copy Back Cover When copying the back cover, you can specify whether to have the
back cover outside (outside page) or inside (inside page).
7. Appendix
264