Item Description
SADF Auto Reset In SADF mode, an original must be set within a specified time after the
previous original has been fed. You can adjust this time from 3 to 99
seconds in increments of 1 second.
Rotate Sort: Auto Paper
Continue
Specify to continue copying when paper of the required orientation
has run out during rotate sort.
Copy Eject Face Method
in Glass Mode
You can specify the way in which copies are delivered when copying
an original placed on the exposure glass.
Copy Eject Face Method
in Bypass Mode
You can specify the way in which copies are delivered when copying
in bypass mode.
Memory Full Auto Scan
Restart
When memory becomes full while scanning originals, the machine can
make copies of scanned originals first, and then automatically proceed
scanning remaining originals.
Insert Separation Sheet You can specify the number of copy pages for inserting the separation
sheet from 1 to 999 pages in increments of 1 page.
Letterhead Setting If you select [Yes] in this function, the machine rotates images correctly.
Staple Position Specify which Top 2 staples or Bottom shown on the initial display with
priority.
Punch Type Specify which punch type (2 holes or 3 holes) has priority to be shown
on the initial display.
Simplified Screen:
Finishing Types
You can select which key is displayed with higher priority for “Finishing
Types” on the Simplified Screen.
Adjust Color Image
Item Description
Background Density of
ADS (Full Color)
The background density is adjusted to skip the texture and copy. You
can adjust the background density up to 5 levels when in Full Color.
Color Sensitivity You can adjust the color specified to convert in “Convert Color” and
the color specified for “Erase Color”, in 5 levels.
A.C.S. Sensitivity This 5-step setting determines the level of the standard used for
discriminating between black & white originals and full color originals
when “Auto Color Select” is selected.
User Tools Menu (Copier/Document Server Features)
267
To Next Page
Loading...
