5. Monitoring and Configuring the
Machine
This chapter describes how to monitor and configure the machine.
Using the Status Monitor
Using the Status Monitor, you can check the print job status, error messages, amount of remaining ink
and other machine status information.
You can specify how to receive notification of print job status via the Status Monitor.
1. Open the [Printer Properties] dialog box.
2. Click the [Maintenance] tab.
3. Click [Status Monitor Settings].
4. From the list in the [Status Monitor display settings] area, select a method for launching
the Status Monitor.
5. Press [OK] two times.
• For details about [Status Monitor Settings], see the printer driver Help.
• You can cancel printing from the Status Monitor. See page 113 "Canceling Printing from the Status
Monitor".
• To check the amount of remaining ink, see page 194 "Replacing a Print Cartridge".
• To check the amount of waste ink, see page 200 "Replacing an Ink Collector Unit".
• To check the error messages on the Status Monitor, see page 253 "Status Monitor Errors".
161
To Next Page
Loading...
