Ricoh SG 7100DN - Host Interface; Network Setup

Setting Name Value
Pmt SSL/TLS Com IPv4: Active
IPv6: Active
The following example explains how to allocate an IPv4 address.
1. Press the [Power] key.
CTW008
2. Press the [ /Menu] key.
CTW010
3. Press the [ ] or [ /Menu] key to display the [Host Interface] menu, and then press the
[#Enter] key.
Menu:
Host Interface
4. Press the [ ] or [ /Menu] key to display [Network Setup], and then press the [#Enter]
key.
Host Interface:
Network Setup
Connecting the Computer and Installing the Software (Network Connection)
59