RICOH SP 311DNw B&W Network Laser Printer
Getting Started Guide
38
2. Select [User Tools] tab.
3. Click [Printer Configuration].
4. Enter Password (Default: Admin), and press [Enter] or click [OK].
5. Select [Wireless] tab.
6. With [Manual Setup] selected under Configuration
Method, enter Wireless LAN Settings to match
those of your Wi-Fi router, as outlined below.
Setting Description
Enter the SSID name (up to 32 characters).
If necessary, select [Infrastructure].
If Ad Hoc is selected for Communication Mode, select the Ad Hoc channel.
Note:
• Ad-Hoc mode, also known as “peer-to-peer” mode, is supported. Ad-Hoc networks
do not require a centralized access point. Instead, devices on the wireless network
connect directly to each other. For instance, if you set up the two laptops in Ad-
wireless mode, they would connect directly to each other, without the need for a
centralized access point. This would be useful for a temporary connection, e.g.,
you’re away from the office/home and need to connect two devices via a Wi-Fi
connection to exchange files or other information when there is no other Wi-Fi
network to connect both devices to.
To Next Page
Loading...
