Ricoh SP 311SFNw - Print Configuration Report

RICOH SP 311SFNw B&W Multifunction Laser Printer
Getting Started Guide
36
Appendix
B
Page 1/3
Page 3/3
Page 2/3
Print Configuration Report
The Configuration Report provides detailed information about your printer settings,
e.g., IP address, network interface type, etc. To check the IP address on the printer’s display, see
Note below.
To print the Configuration Report, proceed as follows:
1. Press [User Tools].
2. Scroll down [] to [Print List/Report], and press [OK].
3. Select [Configuration Page], and press [Yes]. The printer’s IP address is on Page 3/3 (outlined in red,
below).
Note:
• To check the IP address via the printer’s display, press [User Tools]  [Network Settings]  [IPv4
Configuration]  [IP Address]. Write the IP address down. To exit, press [Clear/Stop].