Ricoh SP 3500SF - Sending Scanned Files Via E-Mail

For details about installing the scanner driver, see the instructions provided on the driver CD-
ROM.
2.
If no TWAIN-compliant application is installed on the computer, install one.
For details, see the manual of the application.
Preparation for scanning from a computer with network connection
1. Connect the machine to the network.
2. Specify the network settings, such as the machine's IP address.
For details, see p.9 "Configuring the IPv4 Address Settings".
3. Install the scanner driver on the computer.
For details, see the instructions provided on the driver CD-ROM.
4. If no TWAIN-compliant application is installed on the computer, install one.
For details, see the manual of the application.
Sending Scanned Files via E-mail
You can send scanned files via e-mail using the control panel.
CMF008
Preparation for sending scanned files via e-mail
1.
Connect the machine to the network.
2. Specify the network settings, such as the machine's IP address.
For details, see p.9 "Configuring the IPv4 Address Settings".
3. Configure the DNS and SMTP settings using Web Image Monitor.
For details, see "Configuring the DNS Settings" and "Configuring the SMTP Settings", User
Guide
.
4.
Register the destinations to the Address Book using Web Image Monitor.
For details, see p.11 "Registering Scan Destinations".
1. Using the Scanner Function
6