If you see this screen, proceed to the next step.
6. If you have more originals to scan, place the next original on the exposure glass, and
then press [Yes]. Repeat this step until all originals are scanned.
7. When all originals have been scanned, press [No] to start sending the scanned file.
• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files
are discarded.
• You can also specify a destination using the One Touch buttons, [Pause/Redial] key (only SP
320SFN and SP 377SFNwX). For details, see page 119 "Specifying the Scan Destination Using
the One Touch Buttons or [Pause/Redial] Key (only SP 320SFN and SP 377SFNwX)".
Basic Operation of Scan to E-mail
115
To Next Page
Loading...
