• You can change the machine's default [Density] setting to always scan with a specific density level.
For [Density], see page 184 "Fax Features Settings".
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Detail
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
1. Press the [Image Quality] key.
1. Press the [ ] or [ ] key to select the desired resolution setting, and then press the [OK]
key.
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
level. For [Resolution], see page 184 "Fax Features Settings".
Sending a Fax
157
To Next Page
Loading...
