Changing Operation Modes
You can switch between copier, scanner, and fax modes by pressing the corresponding keys.
Press the [Copy], [Scanner], or [Facsimile] (only SP 320SFN and SP 377SFNwX) key to activate each
mode. While in each mode, the corresponding key lights up.
Function Priority
By default, copy mode is selected when the machine is turned on, or if the preset [System Auto
Reset Timer] time passes with no operation while the initial screen of the current mode is displayed.
You can change the selected mode using [Function Priority] under [Admin. Tools].
For details about [System Auto Reset Timer] or [Function Priority], see page 206 "Administrator
Settings".
1. Guide to the Machine
24
To Next Page
Loading...
