Item Description
min. (0-59) Enter the current minute (0-59).
Energy Saver Mode Tab
Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 • Europe
Select [30sec] or specify the period of time (1-20min) for the machine
to enter Energy Saver mode 2.
• Countries other than European countries
Select [30sec] or specify the period of time (1-240min) for the
machine to enter Energy Saver mode 2.
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The machine recovers from Energy Saver mode when it receives a print job, prints a received fax,
or when any key is pressed.
8. Configuring the Machine Using Utilities
254
To Next Page
Loading...
