Ricoh SP 377SFNWX - Specifying the Scan Destination Using the One Touch Buttons or [Pause;Redial] Key (Only SP 320 SFN and SP 377 Sfnwx)

Specifying the Scan Destination Using the One
Touch Buttons or [Pause/Redial] Key (only SP
320SFN and SP 377SFNwX)
This section describes how to specify a destination using the following keys:
• One Touch buttons
Use these to specify destinations registered as Quick Dial entries.
• [Pause/Redial] key
Press this to specify the last used destination as the destination for the current job.
Using the One Touch buttons
Press the One Touch button to which the desired Quick Dial entry is registered.
Press the [Shift] key to use the Quick Dial entries Nos. 5 to 8.
DSG147
Using the [Pause/Redial] key
Press the [Pause/Redial] key to select the last used destination.
DSG148
Specifying the Scan Destination Using the One Touch Buttons or [Pause/Redial] Key (only SP 320SFN and SP 377SFNwX)
119